Location, Power – Sharp 32N-S500 User Manual
Page 5
5
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
VCR
MENU
CATV
PAUSE
PIP
TV
FLASHBACK
INPUT
TV • VCR • CATV
STOP
REC
REW
PLAY
FF
VCR CH
SWAP
FREEZE
MOVE
SELECT
CM SKIP DISPLAY
MUTE
VOL
—
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
Infrared Remote Control
Part Number : RRMCG1494CESA
Size AA
Dry Batteries (2pcs.)
Location
• For normal operation, your TV should be located in an area of the room where cool, adequate ventilation is provided. Do not place the back
of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic
substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the
outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set
is plugged in, slight current still flows, even with the POWER BUTTON in the OFF position.
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV
broadcasts are being received. Should such noise appear, turn off either the TV or the radio.
• If you are listening to the AM broadcasts, turn the TV off. AM broadcast signals may not be received due to the interference of the TV.
Before using the television, prepare the Remote Control.
To use the remote control, insert batteries first.
• With your thumbnail, pull up the slit as indicated by the arrow to
remove the back cover. Insert two batteries (size “AA”). Be sure
to match the battery
e
/
d
terminals with the
e
/
d
marks inside
the compartment.
Before Operating Your Television
Supplied Accessories
Battery
Cover
Insert the batteries
Pull up
NOTE: