SpectraLink 150 M3 MCU - Manual (Page 12)

SpectraLink Corporation Link WTS Installation and Operation
Part Number: 72-0075-01-C-W.doc Page 1
1. About This Document
This document explains installation and operation of SpectraLink’s Link Wireless
Telephone System (WTS), using the Link 150 Model 3 (M3) Master Control Unit
(MCU). The Link 150 M3 MCU adds wireless service to your existing telephone system.
The installation process connects the Link Wireless Telephone System to your telephone
system, and activates SpectraLink Wireless Telephones.
1.1 Questions?
SpectraLink wants you to have a successful installation. If you have questions please
contact
SpectraLink Customer Support Hotline at (800) 775-5330 ..
The Hotline is open Monday through Friday, 7:00 AM to 6:00 PM Mountain Time.
1.2 Icons and Conventions
This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
! !
Note these instructio ns carefully.
NORM
This typeface indicates a key, label, or button on the MCU or Wireless
Telephone.
1.3 Installation Overview
Installation has three phases. In most cases, a separate person is responsible for each
phase.
•• Site preparation and wire installation – this is usually done by a wire technician or
contractor.
•• Installing the SpectraLink system – this is done by SpectraLink or one of our
certified distributors.
•• Programming the customer's telephone system to work with the SpectraLink
system
– this is usually done by the customer’s system administrator or technician.
Because these major steps require some parallel activities, it is important to coordinate
the activities among the persons involved.