Sun Microsystems Virtual Tape Library User Manual

Page 163

Advertising
background image

Failback

96267 • G

Chapter 6 Recovery following a system failure

149

7. Run the sms command. The results should look like those shown.

8. Open a terminal window on the management host, and ssh to the service 

(“monitoring”) IP address of the failed node, VTLPLUSN1: 

where nnn.nnn.nnn.nnw is the service IP address of the failed node, and vtladmin
is the VTL administrator account user ID. We use the service/monitoring address 
because it stays with the host following failover (the management IP address of a 
failed node transfers to the remaining active node during failover).

[

VTL_Plus

]vtladmin# sms

Usage: sms {force|nas|nasc|fm|sm|bmr|bmrreset|setroot

(sm/fm)|clearreboot(sm/fm)

} {value}

bmr - to set the BMR health status

bmrreset - to reset BMR value

nas - to reset the NAS failure status

nasc - to set nas health check

force - enable force up fm - to set ipstorfm debug level

sm - to set ipstorsm debug level

Last Update by SM: Sun Jan 28 15:32:39 2007

Last Access by RPC: Sun Jan 28 15:32:35 2007

FailOverStatus: 3(UP)

Status of IPStor Server (Transport) : OK

Status of IPStor Server (Application) : OK

Status of IPStor Authentication Module : OK

Status of IPStor Logger Module : OK

Status of IPStor Communication Module : OK

Status of IPStor Self-Monitor Module : OK

Status of IPStor NAS Modules: OK(0)

Status of IPStor Fsnupd Module: OK

Status of IPStor ISCSI Module: OK

Status of IPStor BMR Module: OK( 0)

Status of FC Link Down : OK

Status of Network Connection: OK

Status of force up: 0

Broadcast Arp : NO

Number of reported failed devices : 0

NAS health check : NO

XML Files Modified : NO

IPStor Failover Debug Level : 0

IPStor Self-Monitor Debug Level : 0

Do We Need To Reboot Machine(SM): NO

Do We Need To Reboot Machine(FM): NO

Nas Started: NO

[

mgt_host

]user# ssh vtladmin@nnn.nnn.nnn.nnw

Connecting to nnn.nnn.nnn.nnw ...

Password:

Advertising