Sun Microsystems Virtual Tape Library - Manual (Page 43)

Managing network connectivity
96267 • G Chapter 4 VTL operations 29
5. When the IP Address Configuration property sheet appears, click the Static
radio button ( F below).
6. Click the Edit button ( G above), and enter the IP address that the customer
provided.
7. Leave the MTU text field ( H above) as set by the factory.
8. Press OK ( J above).
You return to the Network Configuration property sheet.
9. If Network Time Protocol (NTP) is in use, press Config NTP ( K above). When the
Network time Protocol Servers dialog appears, use the controls provided ( L ) to
enter the NTP server IP addresses. Click OK ( M ).
F
nnn.nnn.nnn.nnn
J
G
H
NIC_name
K
L
ntp_server_name
M
N
NIC_name