Siemens Gigaset SX541 WLAN dsl - Manual (Page 107)

105
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Sc
hablone 2005_05_02
u You should not change the default setting for the connection mode (= "permanent
connection") if you are using VoIP (see page 55). You can only be called via VoIP if
this setting is used. Please remember, though, that this setting can result in high
connection costs if you have agreed a time-based tariff with your Internet provider.
u If there is a power failure, or if you have switched off the Gigaset SX541 WLAN dsl,
you can only make calls using a phone connected to the Phone 1 socket. The dialing
rules will not apply in this case.
VoiP Settings
You will receive the access and configuration data for Internet telephony from your serv-
ice provider.
ì
Select VoIP in the Telephony menu.
ì
Select On if you want so use Internet telephony (default setting).
ì
Use the default settings for Voice Quality: Voice activity detection, Comfort noise
generation, Gain control and Fixed gain control (input/output).
ì
To add the data for your VoIP accounts, click Add.
When you have configured VoIP settings in the Basic Setup Wizard, the data of your
VoIP account are shown in this line. You can edit this data or add new data for fur-
ther accounts.
ì
Click On to activate the VoIP account option.