Siemens Gigaset SX541 WLAN dsl - Manual (Page 32)

30
Configuring the Local Network
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_tcpip.fm / 21.07.2005
Sc
hablone 2005_05_02
Network Configuration with Windows 2000
To integrate a PC with Windows 2000 into a network that is configured with a
Gigaset SX541 WLAN dsl, you must carry out the following steps:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 31).
3. Install the TCP/IP protocol (see page 32).
4. Make TCP/IP protocol settings (see page 34).
5. Deactivate the http proxy (see page 36).
6. Synchronise the TCP/IP settings with the Gigaset SX541 WLAN dsl
(see page 37).
Installing Network Services
You have to install the network services so that the PCs in your network can access
shared resources. This is done as follows:
ì
Click Start – Settings – Control Panel.
ì
Double-click the Network and Dial-up connections icon.