Siemens Gigaset SX541 WLAN dsl - Manual (Page 126)

124
Administration and Status Information
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / admin_router.fm / 21.07.2005
Sc
hablone 2005_05_02
Restoring the Back-up
ì
For Task, select the option Restore configuration.
ì
Select the backup file in your file system that you wish to use to restore the config-
uration.
A window will appear prompting you to confirm the procedure.
ì
Click OK. The configuration will now be updated.
Resetting to the Factory Settings
You can reset the Gigaset SX541 WLAN dsl to the factory settings. You should do this
before making the device available to others or exchanging it through the dealer. Oth-
erwise unauthorised persons may use your Internet access data at your expense.
ì
Select the option Reset configuration to factory default settings and click OK.
A window will appear prompting you to confirm the procedure.
.
Reboot
You can restart your Gigaset SX541 WLAN dsl if it is not working properly. It should then
be ready for use again.
In the Administration menu, select Reboot.
Click OK to restart the device.
Please remember:
You can restart your Gigaset SX541 WLAN dsl if it is not working properly. It should
then be ready for use again (see page 18).
Please bear in mind that when the device is fully reset, all configuration settings will
return to the factory settings. This means that you will have to completely reconfigure
the Gigaset SX541 WLAN dsl.