Sony D-EJ616CK - Manual (Page 7)

7
To Press
Play/Pause u
Stop x/CHG* 2
Find the beginning of the current track (AMS* 1 ) .once quickly* 2
Find the beginning of the previous tracks (AMS) .repeatedly* 2
Find the beginning of the next track (AMS) > once quickly* 2
Find the beginning of the succeeding tracks (AMS) > repeatedly* 2
Go backwards quickly Hold down .* 2
Go forward quickly Hold down >* 2
* 1 Automatic Music Sensor
* 2 These operations can be done during both play and pause.
About the display
• When you press u after changing the CD or turning off and on the player, the total number
of tracks in the CD and total playing time appear for about two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• Between tracks, the time to the beginning of the next track appears with the “
-” indication.
• During pause, the elapsed playing time flashes.
• The display is illuminated only when you are using the player on an AC power adaptor and a
car battery.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing
(AVLS).”
Playback starts from the point you stopped
Your CD player can recall the playback point where you stopped and then resume playing from
the same place (resume function). There is no ON/OFF switch of the resume function on this CD
player.
Removing the CD
Remove the CD while pressing the pivot in the center of the tray.
Playing a CD