Staple sort, Output no sort sort staple sort exit center, Center – Sharp T FOUND AR-M208 User Manual
Page 106
FINISHER (AR-FN5 N)
104
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Staple sort
In the staple sort mode, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17" (B5, A4,
A4R, B4, and A3) size copies can be stapled.
NOTE:
Different size originals cannot be copied onto copy paper of their respective sizes in the staple
sort mode.
Using the RSPF
1
Set the originals in the document feeder tray.
●
If the number of copies in one set is more than 30, the copies will not be stapled.
●
If the orientation of the originals does not match that of the copy paper, the images of the
originals will be rotated. The stapling position varies with the orientation of the original.
●
When copying 8-1/2" x 14" or 11" x 17" size originals with portrait orientation images,
copies will be stapled at the position shown below.
2
Press the OUTPUT key.
●
The output mode selection screen will appear.
Stapling position
Stapling position
OUTPUT
NO SORT
SORT
STAPLE SORT
EXIT
CENTER
3
2
1
CENTER
Ar-M208_sec.book 104 ページ ２００２年６月１３日 木曜日 午後２時３７分