Sharp T FOUND AR-M208 - Manual (Page 14)

12
GE
T
T
IN
G
S
T
ARTE
D
PART NAMES AND FUNCTIONS
Exterior
Document feeder tray (p. 26)
Hold up to 40 originals.
Original guides
Ajust to the size of the originals.
Right side cover (p. 74)
Open to remove misfed originals.
Feeding roller cover (p. 73)
Open to remove misfed originals.
Exit area
Finished originals are output here.
Platen glass (p. 24)
Place an original to be copied here.
USB interface connector
Plug a USB interface cable into this connnector.
Parallel interface connector
Plug a parallel interface cable (IEEE 1284) into
this connnector.
Power switch (p. 16)
Press to turn copier power on and off.
Handles
Use to move the copier.
Dehumidification heater switch (p. 16)
Press to turn on the heater to prevent dew
condensation inside the copier and moisture
absorption of paper.
Operation panel (p. 14)
All copier controls are located here for easy
operation.
Center tray
Finished copies are deposited in the center tray.
Front cover (p. 76)
Open to remove misfeeds and for copier
servicing.
Paper trays (p. 86)
Each tray holds 500 sheets of copy paper.
Upper exit area cover (p. 81)
Open to remove misfeeds when an optional job
separator tray kit or finisher is installed.
Side cover (p. 75)
Open to remove misfeeds.
Side cover handle (p. 75)
Pull to open the side cover.
Ar-M208_sec.book 12 ページ ２００２年６月１３日 木曜日 午後２時３７分