Sharp T FOUND AR-M208 - Manual (Page 31)

TWO-SIDED COPYING
29
2
MA
KING COP
IE
S
3 Use the and keys to select one-sided to two-sided copying.
● Also the 2-SIDED COPY key can be used to select a 2-sided copy mode.
4 Use the or key to select binding change if desired. Then, press
the OK key.
● The image of one side can be rotated 180º using the image rotation feature. This feature
can be useful depending on the orientation of the original image and the desired binding
position.
5 Set the number of copies and press the START ( ) key.
● Press the CLEAR (C) key to stop copying in the middle of a run.
Using the platen glass
1 Place the first original face down on the platen glass and close the
RSPF.
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE OFF
1
2
2
2
Ar-M208_sec.book 29 ページ ２００２年６月１３日 木曜日 午後２時３７分