Siemens 5890 - Manual (Page 25)

SIEMENS 5890 DSL Router
User’s Guide Chapter 3 Easy Setup
Select Protocol
SIEMENS 19
5. If you enabled IP routing, optionally select one or more of the following:
• NAT Enabled:
Network Address Translation (NAT) allows multiple workstations on your LAN to share a single, public
IP address. All outgoing traffic appears to originate from the router’s IP address.
• Block Net BIOS Traffic:
NetBIOS is a PC networking protocol that can keep network connections open inadvertently. To avoid
excess connection charges, such traffic should be blocked on any metered network service.
6. Click Next. This displays the Dynamic Host Configuration Protocol page.