Siemens 5890 - Manual (Page 45)

SIEMENS 39
Chapter 5
Advanced Setup
This chapter describes how to configure advanced features on the router. Advanced features are listed below.
To configure one of these features, click the link on the left navigation pane of the Router Information page.
WAN Selection Select WAN physical layer mode.
Remote File Configuration Add, delete, and modify remote routers to which the target
router can connect
DMZ Configure unrestricted two-way communication with servers or
individual users on the internet.
Router Clock Set the date and time on your router.
DHCP View and configure the current DHCP settings.
Quality of Service (QoS) Configure QoS, which actively manages network resources to
sustain service levels for priority applications.
Routing Table Configuration Configure multiple routing tables for a single host.
Dial Backup Enable a backup connection to the Internet through an internal
V.90 (model 5835 only) or an external asynchronous modem
connected to the Console port.
ATM Define the level of service for each configured interface (Virtual
Path (VP) and Virtual Circuit (VC) connections).
Switch Management Manage the Ethernet 10/100 switching ports located on the
rear panel of the router.
Command Line Interface Enter any CLI command over the web interface. For complete
command line syntax, refer to the Command Line Interface
Guide.
File Editor Create and edit files stored on the router. These files contain
configuration and other data used by the router.