Sony SNC-RZ30N - Manual (Page 40)

Ad
minis
tra
ting t
he Camer
a
Setting the Schedule — Schedule setting Page / Setting the Activity Detection Function — Activity detection setting Page
40
Setting the Schedule
— Schedule setting Page
When you click Schedule on the Administrator menu,
the Schedule setting page appears.
Use this page to set up to six schedules used for the
preset position function, Day/Night function, FTP client
function, SMTP function, Alarm out 1 or 2 function and
Image memory function.
Schedule No. 1 to Schedule No. 6
For each schedule, specify Start time (hour and minutes)
and End time (hour and minutes), and check the days of
the week that you want to activate the function.
OK/Cancel
See “Buttons common to every setting page” on page
16.
Setting the Activity
Detection Function
—
Activity detection setting Page
When you click Activity detection on the Administrator
menu, the Activity detection setting page appears.
Use this page to set up for the activity detection to link
various applications.
Sensitivity
Select the sensitivity of the activity detection from the
drop-down list. You can select the sensitivity between
Level 1 and Level 9. Level 9 is the maximum
sensitivity.
Tip
The Sensitivity of the activity detection means a
proportion of the changed area (pixels) to the whole
activity detection area.
OK/Cancel
See “Buttons common to every setting page” on page
16.
Setting the Activity Detection Area
Set the activity detection working area as follows:
1
Determine the view angle of the camera at which
you want to perform activity detection, using the
pan, tilt and zoom.
2
Click Activity detection on the Administrator
menu.
A still picture is captured and the Activity detection
setting page appears.