Samsung D371W(i) - Manual (Page 35)

ENGLISH
35 35
Basic Recording
Recording with Ease for Beginners (EASY.Q Mode)
✤ The EASY.Q function works only in <Camera> mode. ➥ page 19
✤ The EASY.Q function allows a beginner to easily make good
recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
3. By pressing the [EASY.Q] button, all functions on
the Camcorder will be set to off and the recording
settings will be set to the following basic modes:
■ The words <EASY.Q> and <DIS ( )> are
displayed at the same time.
4. Press the [Start/Stop] button to start recording.
■ Recording will begin using the basic automatic
settings.
5. Press the [EASY.Q] button again in the STBY mode
and then turn the EASY.Q mode off.
■ The EASY.Q function will not turn off while you
are recording.
■ The Camcorder will return to the settings that
were set prior to activating EASY.Q mode.
[ Notes ]
■ Unavailable buttons during operation
During operation EASY.Q, the following buttons are
unavailable because the items are automatically set.
The corresponding messages may appear if
unavailable operations are attempted.
- MENU button
- C.NITE button
- Q.MENU button
■ The EASY.Q mode settings are deleted when the Battery Pack is
removed from the Camcorder and must be reset when the Battery
Pack is replaced.
■ Taking a still image using the [PHOTO] button while EASY.Q is set
releases the DIS function.
✤ <Camera> 0 ➥ 19
✤ 0
1. [Power] [CAMERA] 0
2. [Mode] [TAPE] 0
VP-D375W(i)/D975W(i)
3. [EASY.Q]
■ <EASY.Q> <DIS ( )> 0
4. [Start/Stop] / 0
■ 0
5. STBY [EASY.Q]
0
■ 0
■
0
[ ]
■
EASY.Q
0
0
MENU
C.NITE
Q.MENU
■
0
■ [PHOTO]
(DIS)
0
3
1
60min
0:00:10 SP STBY
√