Samsung D371W(i) - Manual (Page 66)

66 66
ENGLISH
Connecting to a TV which has no Audio/Video Input
Jacks
✤ You can connect your Camcorder to a TV
through a VCR.
1. Connect the Camcorder to your VCR
with the Audio/Video Cable.
■ The yellow jack: Video
■ The white jack: Audio(L) - Mono
■ The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
5. Turn on both the TV and VCR.
■ Set the input selector on the VCR to
Line.
■ Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the [Power] switch
to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
3. Insert the tape you wish to play back.
4. Using the [
œ œœ œ (REW)]/[ √ √√ √ (FF)] buttons, find the first
position you wish to play back.
5. Press the [ √ √❙❙ (PLAY/STILL)] button.
■ The images you recorded will appear on the TV
after a few seconds.
■ If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
■ The playback mode (SP/LP) is selected automatically.
■ If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Playback
/
✤ VCR
0
1.
VCR 0
■
■ Audio(L) -
■ Audio(R)
2. VCR 0
3. [Power] [PLAYER]
0
4. [Mode] [TAPE]
0 ( VP-D375W(i)/D975W(i))
5. VCR 0
■ VCR Line
0
■ VCR 0
6. 0
1. [Power]
[PLAYER] 0
2. [Mode] [TAPE] 0
( VP-D375W(i)/D975W(i))
3. 0
4. [ œ œ (REW)] /[ √ √√ √ (FF)]
0
5. [ √ √❙❙ (PLAY/STILL)] / 0
■ 0
■
0
[ ]
■ (SP/LP) 0
■
Audio L 0
Antenna
Audio/Video
Cable
Signal flow
TV
VCR
Camcorder
Audio/Video
Cable
œ œ
VP-D371(i)/D371W(i)/
D372WH(i)
VP-D375W(i)/D975W(i)