Samsung D371W(i) - Manual (Page 76)

76 76
ENGLISH
✤ File Number setting works only in <M.Cam> mode. ➥ page 19
✤ File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
✤ File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card, the
file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [CARD].
3. Press the [MENU] button.
■ The menu list will appear
4. Press the [ … … / † † ] button to select <Memory>,
then press the [OK] button.
5. Press the [ … … / † † ] button to select <File No.>,
then press the [OK] button.
6. Press the [ … … / † † ] button to select the desired option
<Series> or <Reset>, then press the [OK] button.
7. To exit, press the [MENU] button.
[ Note ]
When you set <File No.> to <Series>, each file is assigned with a
different number so as to avoid duplicating file names. It is convenient
when you want to manage your files on a PC.
Digital Still Camera Mode
(VP-D375W(i)/D975W(i) only)
Setting the File Number
( VP-D375W(i)/D975W(i))
✤ <M.Cam> 0 ➥ 19
✤ 0
✤
- <Series>
0
- <Reset>
0001 0
1. [Power] [CAMERA] 0
2. [Mode] [CARD] 0
3. [MENU] 0
■ 0
4. [ … … / † † ] <Memory>
[OK] 0
5. [ … … / † † ] <File No.> [OK]
0
6. [ … … / † † ] <Series>
<Reset> [OK] 0
7. [MENU] 0
[ ]
<File No.> <Series>
0 PC 0
Move Select Exit MENU OK
√ Super Fine
√ Series
Move Select Exit MENU OK
M.Cam Mode
√ Memory
Photo Quality
File No.
Series
Reset
4
6
M.Cam Mode
Back
Photo Quality
File No.