Samsung D371W(i) User Manual
Page 97
USB Interface (VP-D375W(i)/D975W(i) only)
Using the PC Camera Function
✤
This function works only in <Camera> mode.
➥
page 19
✤
To use the PC Camera function, DV Driver, Video Codec and DirectX
9.0 programs must be installed in the PC.
✤
When you connect to a Web site that provides video chatting
functions, you can use your Camcorder to participate.
✤
When using this camcorder for video conferencing (such as Net
Meeting), voice communication may not be supported depending on
the video conferencing software. In this case, connect an external
microphone to the soundcard of the PC to enable voice
communication.
✤
Using the Camcorder with PC Net Meeting program installed, you
can participate in video conference.
✤
The PC Camera's screen size (Transferred video frame rate for the
PC Camera function is max 12.5 fps.)
- 640X480 (VGA) pixels for USB 2.0 connection.
✤
If PC is connected with the USB to the Camcorder, only the [Power]
switch, [Mode] switch, [Zoom] lever and [W / T] Button can be
operated.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Connect one end of the USB cable to the USB jack
on the Camcorder and the other end to the USB
connector on your computer.
97
97
ENGLISH
PC
✤
<Camera>
0 ➥
19
✤
PC
DV
/
DirectX 9.0.
0
✤
0
✤
Net Meeting
0
0
✤
PC Net Meeting
0
✤
PC
PC
12.5 fps
0
-
USB 2.0
640X480 (VGA)
0
✤
USB
[Power]
/
[Mode]
/
[Zoom]
0
1.
[Power]
[CAMERA]
0
2.
[Mode]
[TAPE]
0
3.
USB
USB
USB
0
USB
VP-D375W(i)/D975W(i)
1
2