Samsung D371W(i) - Manual (Page 71)

71 71
ENGLISH
Connection
VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi
Recording (Copying) a TV Programme or Video Tape onto a Camcorder
Tape (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)
✤ The Recording (Copying) function works
only in <Player> Mode.
➥ page 19
✤ Connect your Camcorder to a VCR or a
TV using the AV jack to record a TV
programme or copy a video tape onto a
Camcorder tape.
✤ Set the <AV In/Out> to <In> before
Recording (Copying).
➥ page 69
Recording (Copying) onto a
Camcorder Tape
1. Get your TV or VCR ready.
2. Connect the Camcorder to your VCR or
TV with the Audio/Video cable.
■ Connect the Audio/Video cable to the
output jack on your VCR or TV
■ The yellow jack: Video
■ The white jack: Audio (L)- Mono
■ The red jack: Audio (R)
3. Insert an empty tape in your Camcorder.
To record from a VCR
4. Insert the video tape to be played in your VCR.
■ Pause at the starting point of playing.
5. Start copying by pressing the [Start/Stop] button on your Camcorder.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Start/Stop] button on your Camcorder.
When Recording (Copying) is Complete:
Press the [ ■ (Stop)] button on your Camcorder to stop recording (copying).
[ Notes ]
■ If you operate the Camcorder connected to another device, always
power the Camcorder from household AC outlet using the AC power
adapter.
■ The recorded contents can be played back in the same manner as
when playing back images recorded on this camcorder.
■ Copy-protected video tapes such as Macrovision or unstable TV
signals cannot be recorded on this camcorder.
✤ <Player>
0 ➥ 19
✤ VCR
0
✤ <AV In/Out>
<In> 0 0 ➥ 69
1. VCR 0
2. VCR
0
■ VCR
0
■
■ Audio(L)
■ Audio(R)
3. 0
VCR
4. VCR 0
■ 0
5. [Start/Stop] 0
6. VCR 0
4. 0
5. [Start/Stop] 0
:
[ ■ Stop 0
[ ]
■
0
■
0
■ Macrovision
0
Camcorder
Audio/Video Cable
Signal flow
VCR
or
TV
Audio/Video
Cable
œ œ
VP-D371(i)/D371W(i)/
D372WH(i)
VP-D375W(i)/D975W(i)