Funtion overview – Saba 31-5023 User Manual
Page 8
 
8
Funtion overview
Front panel
1. POWER 
To turn the unit on or off. When the system is turned on, 
the unit will go to the mode it was set in before the 
power was turned off. 
2. OPEN/CLOSE 
To open/close the disc tray. 
3. SOURCE 
Select source: DVD, FM, AM or AUX (auxiliary 
component).
4. SELECT 
To select the audio channel to view or adjust its level. 
5. PLAY/PAUSE /
To start or temporarily stop playback. 
6. STOP 
Stops playback of a disc and clears the stored program. 
7.  SKIP/TUNING 
In tuner mode, press to tune to a higher or lower radio 
frequency. For automatic tuning, press and hold it for more 
than 2 seconds. 
In DVD mode, press to play a disc in fast forward or reverse 
modes.
8. VOLUME +/- 
Increase or decrease the master volume level. 
9. PHONES 
Use to connect the headphones.
1
2
3
5
7
9
8
4
6