Error displays/messages, 27 error displays/messages – Sony CDX-CA900X User Manual

Page 27

Advertising
background image

27

Error displays/Messages

*1

When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.

*2

The disc number of the disc causing the error
appears in the display.

If these solutions do not help improve the
situation, consult your nearest Sony dealer.

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set the local seek mode to “off” (page

17).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to the monaural reception mode (page

17).

A program broadcast in stereo is heard in
monaural.

• The unit is in monaural reception mode.

t Cancel monaural reception mode (page

17).

Interference occurs during FM reception.

The wide mode is selected.
t Set the IF mode to “IF Auto” (page 14).

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about
5 seconds, and an alarm sound will be heard.

Blank

*

1

No tracks have been recorded on an MD.*

2

t Play an MD with recorded tracks on it.

Error

*

1

• An inserted CD is dirty or inserted upside

down.*

2

t Clean or insert the CD correctly.

• An inserted CD/MD cannot play because of

some problem.*

2

t Insert another CD/MD.

High Temp

The ambient temperature is more than 50°C
(122°F).
t Wait until the temperature goes down

below 50°C (122°F).

NO Disc

*

1

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO Magazine

The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.

NO Music

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

Not Ready

The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.

Push Reset

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

continue to next page

t

Advertising