Star Micronics LC-4511 - Manual (Page 132)

121
Labels
Backing sheet: 4.5 ″ to 16.5 ″ / 114 to 419mm
Thickness
Backing sheet: 0.00276 ″ to 0.0035 ″ / 0.07 to
0.09mm
Total: 0.0075 ″ / 0.19mm
• Use labels under normal temperature and humidity
conditions only.
Adjusting for paper thickness
Paper comes in different weights, normally expressed
as gsm (grams per square meter) or lbs (pounds).
Some forms paper also have multiple pages that
make them quite thick. Use the following procedure
to change the gap between the print head and the
platen and adjust for paper thickness.
❏ Move the adjustment lever to one of its four
settings. Position 2 is most suitable for single-
sheet paper.
1
2
3
4
5
6