SMC Networks SMC Barricade Plus SMC7004WFW - Manual (Page 131)

T
ROUBLESHOOTING
A-3
Management Problems
Cannot connect using
the Web browser
• Be sure to have configured the Wireless Barricade Plus
with a valid IP address, subnet mask and default
gateway.
• Check that you have a valid network connection
to the Wireless Barricade Plus and that the port you are
using has not been disabled.
• Check the network cabling between the
management station and the Wireless Barricade Plus.
Forgot or lost the
password
• Press the Reset button on the front panel
(holding it down for at least five seconds) to
restore the factory defaults.
Troubleshooting Chart
Symptom Action