Chapter 5 configuring client tcp/ip, Installing tcp/ip protocol in your pc, Windows 95/98/me – SMC Networks SMC Barricade Plus SMC7004WFW User Manual
Page 83: Configuring client tcp/ip -1, Installing tcp/ ip protocol in your pc -1, Windows 95/ 98/me -1, Tcp/ip, Hapter, Onfiguring, Lient
Advertising
5-1
C
HAPTER
5
C
ONFIGURING
C
LIENT
TCP/IP
If you have not previously installed the TCP/IP protocol on your
client PCs, refer to the following section. If you need information on
how to configure a TCP/IP address on a PC, refer to “Setting TCP/IP to
Work with the Wireless Barricade Plus” on page 5-5.
Installing TCP/IP Protocol in Your PC
Windows 95/98/ME
1. Click the “Start” button and choose “Settings,” then click
“Control Panel.”
2. Double click the “Network” icon and select the “Configuration”
tab in the Network window.
3. Click the “Add” button to add the network component to your
PC.
4. Double click “Protocol” to add the TCP/IP protocol.
Advertising