SMC Networks SMC Barricade Plus SMC7004WFW - Manual (Page 90)

S
ETTING
TCP/IP
TO
W
ORK WITH THE
W
IRELESS
B
ARRICADE
P
LUS
5-8
Configuring Your Computer with Windows 95/98/ME
You may find that the instructions here do not exactly match your
version of Windows. This is because these steps and screenshots were
created from Windows 98. Windows 95 and Windows Millennium
Edition are very similar, but not identical, to Windows 98.
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup by connecting your devices,
you need to configure your computer to connect to your Wireless
Barricade Plus. You need to determine how your ISP issues your IP
address. Many ISPs issue these numbers automatically using a
networking technology known as Dynamic Host Configuration
Protocol, or DHCP. Other ISPs will specify your IP address and
associated numbers, which you must enter manually. This is also
known as a static IP address. How your ISP assigns your IP address
determines how you will configure your computer.
1. From the Windows
desktop, click the "Start"
button. Choose "Settings,"
then click "Control Panel."