SMC Networks SMC Barricade Plus SMC7004WFW - Manual (Page 87)

C
ONFIGURING
C
LIENT
TCP/IP
5-5
Setting TCP/IP to Work with the Wireless
Barricade Plus
Windows 95/98/ME
1. Click the “Start” button and choose “Settings,” then click
“Control Panel.”
2. Double click the “Network” icon. Select the TCP/IP line that has
been assigned to your network card in the “Configuration” tab of
the Network window.
3. Click the “Properties” button to set the TCP/IP protocol for the
Wireless Barricade Plus.
4. You can dynamically assign TCP/IP address settings to a client,
or you can manually configure a client with address settings to
meet your specific network requirements. (Note that the default
IP address of the Wireless Barricade Plus is 192.168.2.1.)