Sharp MX-PB12 - Manual (Page 12)

10
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
2 Click the [Standard installation]
button. 3 Printers connected to the
network are detected. Select the
machine and click the [Next]
button.
4 A confirmation window appears.
Check the contents and then
click the [Next] button.
When [Custom installation] is
selected, you can change any of the
items below. When [Standard
installation] is selected, the installation
will take place as indicated below.
• Machine connection method: LPR
Direct Print (Auto Search)
• Set as default printer:Yes (excluding
the PC-Fax driver)
• Printer driver name: Cannot be
changed
• PCL printer display fonts: Installed
If you selected [Custom installation],
select [LPR Direct Print (Auto Search)]
and click the [Next] button.
If you selected other than [LPR Direct
Print (Auto Search)], see the following
pages:
• LPR Direct Print (Specify Address):
page 13
• IPP: page 15 •Shared printer: page 22
• Connected to this computer: page 17
Note
• If the machine is not found, make
sure that the machine is powered on
and that the machine is connected
to the network, and then click the
[Re-search] button.
• You can also click the [Specify
condition] button and search for the
machine by entering the machine's
name (host name) or IP address.
☞
Checking the IP address of
the machine (page 6)
Note
Setup_multi.book 10 ページ ２００９年７月７日 火曜日 午後２時８分