Sharp MX-PB12 - Manual (Page 34)

32
MAC OS X
+
14 Configure the printer driver.
• The procedure for configuring the printer driver varies depending on the operating system version. The procedure
for versions 10.4.11 and 10.5 - 10.5.6 and the procedure for other versions are explained separately below.
• The machine can print using the IPP function. If you wish to use the IPP function, see "Printing using the
IPP function" (page 34) to configure the printer driver settings.
(1) Click the [Default Browser] icon.
• If multiple AppleTalk zones are
displayed, select the zone that includes
the printer from the menu.
• If you are using Mac OS X v10.5 to
10.5.6, click the [Default] icon.
(2) Click the machine's model name.
• The machine's model name usually
appears as [SCxxxxxx]. ("xxxxxx" is a
sequence of characters that varies
depending on your model. Ask your
network administrator for details.)
• The PPD file of the machine is
automatically selected.
(3) Make sure that the PPD file of
your model is selected.
(4) Click the [Add] button.
The PPD file of the machine is
automatically selected and the peripheral
devices installed on the machine are
detected and automatically configured.
(1) Select [AppleTalk].
If multiple AppleTalk zones are displayed,
select the zone that includes the printer
from the menu.
(2) Click the machine's model name.
The machine's model name usually
appears as [SCxxxxxx]. ("xxxxxx" is a
sequence of characters that varies
depending on your model. Ask your
network administrator for details.)
(3) Select the PPD file of the
machine.
• If you are using Mac OS X v10.3.9,
select [Auto Select].
• If you are using Mac OS X v10.2.8,
select [Sharp] and click the PPD file of
your model.
(4) Click the [Add] button.
If you are using Mac OS X v10.3.9, the
PPD file of the machine is automatically
selected and the peripheral devices
installed on the machine are detected and
automatically configured.
v10.4.11, v10.5 - 10.5.6
(1)
(2)
(4)
(3)
v10.2.8, v10.3.9
(1)
(2)
(4)
(3)
The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]
Note
Setup_multi.book 32 ページ ２００９年７月７日 火曜日 午後２時８分