Sharp MX-PB12 - Manual (Page 19)

17
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
ENGLISH WHEN THE MACHINE WILL BE CONNECTED
WITH A USB CABLE
Supported operating systems: Windows 2000 * /XP * /Server 2003 * /Vista * /Server 2008 *
* Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1 Click the [Printer Driver] button.
2 Click the [Custom installation]
button.
3 When you are asked how the
printer is connected, select
[Connected to this computer]
and click the [Next] button.
4 When you are asked if you wish
to install the display fonts, select
an answer and click the [Next]
button.
• Make sure that a USB cable is not connected to your computer and the machine.
If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel]
button to close the window and disconnect the cable.
• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.
• To use the port created when the printer driver is installed for fax data transfer, install the printer
driver first and then install the PC-Fax driver.
Note
Setup_multi.book 17 ページ ２００９年７月７日 火曜日 午後２時８分