Sharp MX-PB12 - Manual (Page 18)

16
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
5 Enter the machine's URL and
click the [Next] button.
Enter the URL in the following format:
Normal format:
http://<the machine's domain name or IP
address>:631*
1 /ipp
*1 Normally "631" should be entered for the
port number. If the IPP port number has
been changed on the machine, enter the
new port number.
When SSL is used:
https://< the machine's domain name or IP
address>:<port number*
2 >/ipp
*2 Normally the port number and the colon ":"
immediately preceding the port number can
be omitted. If the IPP port number for SSL
has been changed on the machine, enter the
new port number.
6 Perform steps 5 through 12 on
page 14 to continue the
installation.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER FOR THE OPTIONS
INSTALLED ON THE MACHINE" (page 24)
to configure the printer driver settings.
• If you installed the PS printer driver or the
PPD driver, the PS display fonts can be
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 28).
If your computer and the machine are
connected to the same local area
network, you can click the [Search]
button to search for the machine. The
machine's URL will appear. Select the
URL and click the [OK] button. You will
return to the above screen and the
machine's URL will be automatically
entered.
Note
Setup_multi.book 16 ページ ２００９年７月７日 火曜日 午後２時８分