Sharp MX-PB12 - Manual (Page 28)

26
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
X When the PPD driver is installed
1 Click the [Start] button ( ), click
[Control Panel], and then click
[Printer].
• In Windows XP/Server 2003, click the
[start] button and then click [Printers and
Faxes].
• In Windows 2000, click the [Start]
button, select [Settings], and then click
[Printers].
2 Open the printer properties
window.
(1) Right-click the printer driver
icon of the machine.
(2) Select [Properties].
3 Configure the printer driver for
the options installed on the
machine.
(1) Click the [Device Settings] tab.
(2) Configure each item based on
the machine configuration.
The items and the procedures for
configuring the items vary depending on
the operating system version.
(3) Click the [OK] button.
If [Printers and Faxes] does not
appear in the [start] menu in Windows
XP, click the [start] button, click
[Control Panel], click [Printers and
Other Hardware], and then click
[Printers and Faxes].
Note
You can check the options that are
installed on the machine by printing
out the "PRINTER SETTINGS LIST" in
the system settings. (However, note
that "Input Tray Options" must be set
to the number of trays on the
machine.) Follow these steps to print
out the "PRINTER SETTINGS LIST":
Press the [SYSTEM SETTINGS] key,
touch the [LIST PRINT] key,
"PRINTER TEST PAGE" key and then
touch the "PRINTER SETTINGS
LIST" key.
Note
Setup_multi.book 26 ページ ２００９年７月７日 火曜日 午後２時８分