Sony SRP-X500P - Manual (Page 30)

30
Specifications
Specifications
System
Audio
Frequency response
20 Hz to 20 kHz ±0.5 dB (with LINE
OUTPUT, 1 kHz reference)
T.H.D 0.01 % or less (with LINE OUTPUT, 1
kHz)
S/N ratio 94 dB or more (LINE OUTPUT, IHF-A)
Crosstalk –80 dB or less (between LINE channels,
1 kHz with input cut-off)
0 dBu = 0.775 Vrms
Video
Frequency response
50 Hz to 10 MHz
COMPONENT/RGB
Frequency response
50 Hz to 150 MHz
480 p, 1080 i, supports 1280 × 1024 60 Hz
(SXGA)
Audio input connectors
MIC INPUT 1 to 4
Connector shape
XLR-3-31 type
Circuit Balanced
Reference input level
–60 to –30 dBu
Maximum input level
–37 to –7 dBu
Impedance 2.2 k
Ω or more
LINE IN/AV RGB INPUT A to E
Connector shape
Phono jack
Circuit Unbalanced
Reference input level
–30 to 0 dBu
Maximum input level
+10 dBu
Impedance 10 k
Ω or more
Audio output connectors
LINE OUTPUT 1 to 4
Connector shape
Phono jack
Circuit Unbalanced
Reference output level
–5 dBu
Maximum output level
+15dBu
Load impedance
10 k
Ω or more
SPEAKERS CH-1/2
Terminal shape
Screw type
Maximum output
90 W (4
Ω, 8Ω)
Load impedance
4
Ω to 16 Ω
SPEAKERS CH-3/4
Terminal shape
Screw type
Maximum output
When Lo imp. is selected: 50 W (4
Ω,
8
Ω)
When 70V LINE is selected: 60 W (82
Ω)
Load impedance
When Lo imp.is selected: 4
Ω to 16 Ω
When 70V LINE is selected: 82
Ω to
10 k
Ω
Video input connectors
AV RGB INPUT VIDEO A to C
Connector shape
Phono jack
Signal format Composite
Level 1 Vp-p
Impedance 75
Ω
AV RGB INPUT COMPONENT RGB D/E
Connector shape
HD D-sub, 15-pin (female)
Signal format
RGB/component
Level Video signal: 0.7 Vp-p
Sync signal: 1 to 5 V
Impedance Video signal: 75
Ω
Sync signal: 47 k
Ω
Video output connectors
OUTPUT COMPONENT/RGB
Connector shape
HD D-sub, 15-pin (female)