Sharp MD-M1H - Manual (Page 44)

43
■ Listening to sound from an exter-
nal unit
To listen to sound from an external unit connected
to the analogue input terminals:
■ Manual recording
You can start a recording manually whilst listening
to playback from other external equipment (Tape
deck, Tuner) connected to the auxiliary input.
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the AUX button.
3
Start playback on the external unit, and adjust
the input sound level using the AUX INPUT
LEVEL control.
● When the AUX INPUT LEVEL control is set to
MIN, no sound is obtained.
● Adjust the recording level so that the “OVER”
indicator does not light at the maximum level.
L
R
OVER
OVER
4
Adjust the sound level using the VOLUME
buttons on the remote control or the VOLUME
control on this main unit.
4
4
2
1
2
1
MAX
MIN
AUX
INPUT
LEVEL
3
1
Press the ON/STAND-BY button to turn the
power on.
2
Load a recordable MD.
3
Press the AUX button.
4
Press the
I
REC button.
5
Start playback on the external unit.
6
Adjust the recording level using the AUX INPUT
LEVEL control.
● Adjust the recording level so that the “OVER”
indicator does not light at the maximum level.
L
R
OVER
OVER
7
Press the
0 6
button.
To stop recording:
Press the ■ button.
3
2
3
1
7
4
4
7
H
MAX
MIN
AUX
INPUT
LEVEL
6 H
1
(Continued)