Sharp MD-M1H - Manual (Page 9)

8
15
● 2 "AA" size batteries
(UM/SUM-3, R6, HP-7
or similar)
15
Remote
sensor
0.2 m - 6 m
(8" - 20')
(Continued)
■ Remote control ■ To change the brightness of the
display
When bright
When dark
Ï
● When inserting or removing the batteries, push
them toward the battery terminal.
● Installing the batteries incorrectly may cause the
unit to malfunction.
Precautions for battery use:
● Insert the batteries according to the direction in-
dicated in the battery compartment.
● Replace all old batteries with new ones at the
same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if the
unit will not be used for long periods of time.
This will prevent potential damage due to battery
leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
● Periodically clean the transmitter LED on the
remote control and the sensor on the main unit
with a soft cloth.
● Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
● Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the DIMMER button.
● The display will become dimmer.
To return to the original brightness:
Press the DIMMER button again.
(Remote control operation)