Specifications – Sharp MD-M1H User Manual
Page 50
49
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and speci-
fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.
●
General
Power source:
AC 230 V, 50 Hz
Power
consumption:
60 W
Dimensions:
Width; 160 mm (6-5/16")
Height; 240 mm (9-1/2")
Depth; 300 mm (11-13/16")
Weight: 4.4 kg (9.7 lbs.)
●
MiniDisc recorder section
Type:
MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed:
400 - 900 rpm CLV, Approx.
Error correction:
ACIRC (Advanced Cross In-
terleave Reed-Solomon
Code)
Quantization:
20-bit linear (A/D converter)
Coding:
ATRAC (Adaptive Transform
Acoustic Coding)
Sampling
frequency:
44.1 kHz
Recording
method:
Magnetic modulation
overwrite method
Frequency
response:
20 - 20,000 Hz
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
Audio channel:
Stereo; 2 channels
Monaural; 1 channel
(playback only)
(long-time recording mode)
●
Compact disc player section
Type:
Top open type compact disc
player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed:
200 - 500 rpm CLV, Approx.
Error correction:
CIRC (Cross Interleave Reed-
Solomon Code)
Quantization:
16-bit linear
Frequency
response:
20 - 20,000 Hz
D/A converter:
1-bit D/A converter
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
●
Tuner section
Frequency range: FM; 87.5 - 108.0 MHz
AM; 522 - 1,620 kHz
Sensitivity:
FM; 2.5
µ
V (75 ohms unbal-
anced)
AM; 650
µ
V/m
●
Amplifier section
Output power:
RMS; 40 W (20 W + 20 W)
(10 % T.H.D.)
Output terminals: Speaker; 4 ohms
Headphones; 16 - 50 ohms
(recommended 32 ohms)
Input terminals:
AUX; 500 mV/47 kohms
●
Speaker section
Type:
Full range speaker system
Speakers:
10cm (4") full-range speaker
Maximum input
power:
40 W
Rated input
power:
20 W
Impedance:
4 ohms
Dimensions:
Width; 160 mm (6-5/16")
Height; 240 mm (9-1/2")
Depth; 183 mm (7-1/4")
Weight; 1.8 kg (4 lbs.)/each