Sony RDR-GX310 - Manual (Page 13)

13
H
ook
up
s and
Se
tti
n
gs
With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
satellite receiver or cable box is turned on.
To watch cable or satellite programs, you need to match the channel on the recorder (L1 or L3) to the
input jack connected to the cable box or satellite receiver (LINE IN 1 or 3).
z Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied) instead of the
audio/video cord.
• If you connect an S-video cord to the LINE IN 1 jack, set “Line1 Input” in “Video” setup to “S Video” (page 77). If
you connect an S-video cord to the LINE IN 3 jack, set “Line3 Input” in “Video” setup to “S Video” (page 77).
A: Cable box or satellite receiver with a video/audio output
ANT IN
R L
S VIDEO
AUDIO
OUT
VIDEO
OUT
TO TV
COAXIAL
DIGITAL OUT
OPTICAL
PCM/DTS/DOLBY DIGITAL
VHF/UHF
IN
COMPONENT
VIDEO OUT LINE OUT
VIDEO S VIDEO R-AUDIO-L P B /C B
Y
P R /P R ~ AC IN OUT
1
3
VIDEO
S VIDEO
R-AUDIO-L
LINE IN
1
3
VIDEO
S VIDEO
R-AUDIO-L
LINE IN
to LINE IN 1 or 3
DVD recorder
Audio/video cord
(not supplied)
: Signal flow
Cable box/satellite receiver
Antenna cable
(supplied)
to antenna input
S-video cord
(not supplied)
Wall
TV
,continued