Sony RDR-GX310 - Manual (Page 24)

24
TV Type
If you have a wide-screen TV, select “16:9.”
If you have a standard TV, select either “4:3
Letter Box” (shrink to fit) or “4:3 Pan Scan”
(stretch to fit). This will determine how
“wide-screen” images are displayed on your
TV.
Audio Connection
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT” and set the
digital output signal (page 79).
3
Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press
O RETURN.
z Hint
If you want to run “Easy Setup” again, select “Easy
Setup” from “SETUP” in the System Menu (page 83).
b
Note
If you use an S-video cord to connect your cable box or
satellite receiver, set “Line1 Input” or “Line3 Input” in
“Video” setup to “S Video” (page 77).
Setting Up the G-Code
®
System
Setting up your recorder involves coordinating the
TV channel number (the number you turn to on
your TV or recorder to watch a program) with the
guide channel (the number that’s assigned to that
channel in your TV program guide). Note that this
feature may not be available in some areas.
To find the guide channel numbers, look at the
“Channel Line-up Chart” in the program guide for
your area that features G-Code numbers.
Use the Channel Line-up Chart to coordinate the
guide channel number with the TV channel
number. For example, if HBO is listed in the
Channel Line-up Chart as channel 33, and the
recorder receives HBO on channel 5, coordinate
these numbers using the following procedure.
1
Press SYSTEM MENU while the recorder is
stopped.
2
Select “SETUP,” and press ENTER.
1 2 3
4 6
7 8 9
0
5
</M/m/,,
ENTER
O RETURN
SYSTEM MENU
Number
buttons, SET
SETUP
Settings
Easy Setup
Tuner Preset
Options
Features
Audio
Video
Language
Clock
Set G-Code Channels