Sony RDR-GX310 - Manual (Page 43)

43
T
im
er R
ec
ord
ing
z Hint
You can play the recorded program by selecting the
program title in the Title List.
b
Notes
• If a message indicating that the disc is full appears on
the screen, change the disc, or make available space for
the recording (DVD+RW/DVD-RW only) (page 66).
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
To record a satellite program, turn on the satellite tuner
and select the satellite program you want to record.
Leave the satellite tuner turned on until the recorder
finishes recording. If you connect equipment with a
timer function, you can use the Synchro Rec function
(page 48).
• Even if the timer is set for the same daily or weekly
program, the timer recording cannot be made if it
overlaps with a program that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• The Rec Mode Adjust function only works with a timer
recording. It does not function with Quick Timer or
Synchro Rec.
The G-Code system is a feature that simplifies
setting the timer. Just enter the G-Code number
listed in the TV program guide. The date, time,
and channel of that program are set automatically.
Before you start, check that the TV and guide
channels are correctly set in “Set G-Code
Channels” in “Settings” setup (page 74).
1
Press
[TIMER].
• If the “Timer – Standard” display appears,
press
< to switch the display to “G-Code.”
2
Press the number buttons to enter the
G-Code number, and press SET.
• If you make a mistake, press CLEAR and re-
enter the correct number.
Recording TV programs using the
G-Code system
1 2 3
4 6
7 8 9
0
5
</M/m/,,
ENTER
[TIMER]
Number
buttons, SET
x REC STOP
CLEAR
z REC
Timer - G-Code
Set the timer by entering the timer code.
Standard
G-Code No. Cancel
OK
,continued