Sony RDR-GX310 - Manual (Page 41)

41
T
im
er R
ec
ord
ing
The recorder can receive and record stereo/SAP
programs.
Stereo programs
When a stereo program is received, the
“STEREO” indicator lights up on the front panel
display. If there is noise in the stereo program, set
“Auto Stereo” in “Options” setup to “Off”
(page 82). The sound will be recorded in monaural
but with less noise.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is received,
the “SAP” indicator lights up on the front panel
display. To record only SAP sound, set “Tuner
Audio” in “Options” setup to “SAP” (page 82).
z Hint
You can select the audio (main or SAP) while recording
bilingual programs using the AUDIO button. This does
not affect the recorded sound.
Pictures with copy protection cannot be recorded
on this recorder.
When the recorder receives a copy guard signal,
the recorder continues to record but only a blank,
grey colored screen will be recorded.
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
Timer Recording (Standard/
G-Code)
You can set the timer for a total of 30 programs, up
to one month in advance.
There are two methods to set the timer: the
standard method and G-Code method.
• Standard: Set the date, time, and program
position of the program manually.
• G-Code: Enter the G-Code number designated
for each TV program (page 43).
b
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
Recording a stereo/SAP program
Unrecordable pictures
Copy control
signals Recordable discs
Copy-Free
Copy-Once
(CPRM*)
Copy-Never None (a blank screen is
recorded)
+ RW -RW VR -RW
Video
- R + R
-RW VR
Setting the timer manually
(Standard)
+ RW -RW VR -RW
Video
- R + R
1 2 3
4 6
7 8 9
0
5
</M/m/,,
ENTER
[TIMER]
x REC STOP
TOOLS
,continued