Sony PCS-1/1P - Manual (Page 142)

142
Conducting a Videoconference Using a Whiteboard
4
Write anything using the stylus, marker or eraser that come with the mimio
Xi on the whiteboard.
The notes you are writing are displayed in real-time on the remote and local
monitor screens.
• Only one whiteboard can be used at a time. If more than two terminals use the
whiteboard with the mimio Xi connected, the whiteboard picture written by the party
who has set “Whiteboard ON” first will be displayed on the monitors of all the
terminals.
• Set both “Far End Camera Control” in the Dial Setup menu (page 41) and “Far End
Camera Control” in the Answer Setup menu (page 43) to “On”. The whiteboard
cannot be used for a videoconference unless these items are set to “On” for all the
participating terminals.
• If a party participates in the middle of the multipoint conference using a whiteboard,
the monitor of the party displays only the whiteboard picture written from that time.
The pictures transmitted before participation are not displayed on his monitor.
Notes
Local monitor screen Remote monitor screen
Whiteboard
Monitors on the local and remote
parties