Sony PCS-1/1P - Manual (Page 164)

164
Starting a Multipoint Videoconference
and the telephone numbers for the ISDN connection for all the parties to be
connected for a multipoint conference.
For details on the setups, see step 3 in “To call a remote party not
registered in the Phone Book” on page 71.
4
Select “Dial”, and press the PUSH ENTER button on the Remote
Commander. You can also press the CONNECT/DISCONNECT (
/ )
button on the Remote Commander.
The system begins dialing the numbers selected in step 3. “ Dialing
(LAN)”, “ Dialing (ISDN)” or “ Dialing (LAN & ISDN)” appears on
the monitor screen, and the ON LINE indicator (blue) on the Communication
Terminal blinks.
When the system connects to all the remote parties, the message “Meeting
starts!” appears on the screen, and the ON LINE indicator stops blinking and
lights.
To call the second and other remote parties
After starting communication with the remote party selected first, press the
CONNECT/DISCONNECT (
/ ) button on the Remote Commander to
open the submenu.
Perform steps 1-4 of the procedure shown in “To call remote parties by
selecting from the Phone Book” on page 161 or steps 1-4 of the procedure in
“To call remote parties not registered in the Phone Book” on page 163
depending on the registration status of each remote party.
More Options
Line I/F
Dial
Dial Save
A
B
C
D
E
LAN
LAN
LAN
LAN
LAN
LAN&ISDN
Cancel
Phone Book
Dial
Disconnect