Sony PCS-1/1P - Manual (Page 148)

148
Connection Examples for a Multipoint Videoconference
Connection Examples for a Multipoint
Videoconference
Installing the optional PCS-323M1 H.323MCU software in one
Communication Terminal allows you to conduct a multipoint videoconference
among up to six points.
For a multipoint videoconference only the Communication Terminal in which the PCS-
323M1 H.323 MCU software can be installed is used as main terminal. If you want to
use multiple Communication Terminals as main terminals depending on the type of
conference, the same number of H.323 MCU software as that of the main terminals is
required.
Using the LAN Connection (Up to 6 Points)
Note
DC 19.5V
AUDIO OUT AUDIO IN AUX1– VIDEO IN–AUX2 CAMERA UNIT MIC (PLUG IN POWER)
(MIXED)
AUX MAIN– MONITOR– SUB
VIDEO OUT
RGB OUT
IR OUT
100BASE-TX
10BASE-T
1 2
1 2 ISDN UNIT WHITE
BOARD
DSB
TERMINAL VISCA OUT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
LAN
PCS-323M1
H.323 MCU
software
to 100BASE-TX/
10BASE-T UTP cable (category 5, straight)
(not supplied)
to LAN