Sony PCS-1/1P - Manual (Page 98)

98
Using Still Images Stored in a “Memory Stick” for a Videoconference
To delete a still image
Display the Memory Stick menu, select the still image you want to delete, and
press the PUSH ENTER button. Select “Delete” from the displayed submenu
with the
V or v button, then press the PUSH ENTER button. The selected still
image is deleted from the “Memory Stick”.
To remove the “Memory Stick”
Push the “Memory Stick” and release your finger. The “Memory Stick” will
come out a little, and you can then remove it.
While in communication, you can send still images stored in a “Memory Stick”
to the remote party.
1
Insert a “Memory Stick” into the Memory Stick slot on the Communication
Terminal, and display the Memory Stick menu.
For how to insert a “Memory Stick” and how to display the Memory Stick
menu, see “Displaying a Still Image Stored in a “Memory Stick”” on page
95.
2
Use the V, v, B or b button on the Remote Commander to select the still
image you want to send, then press the PUSH ENTER button.
The submenu appears.
3
Use the V or v button to select “Send”, then press the PUSH ENTER
button.
The selected still image is displayed, and is sent to the remote party. The
message “The still image has been sent.” appears on the monitor screen.
When you select “Slide Show” in step 3 above
If you select “Slide Show” from the submenu and press the PUSH ENTER
button, a slide show starts from the selected still image, and it will be sent to
the remote party.
Sending a Still Image Stored in a “Memory Stick”
Memory Stick
2
Send
Save
Load
Delete
Slide Show