Sony PCS-1/1P - Manual (Page 36)

36
Using the Menu
Memory Stick menu
The Memory Stick menu is used when you
are using a “Memory Stick”. The menu is
not displayed unless a “Memory Stick” is
installed in the Communication Terminal.
The menu appears when you select
from
the menu tabs displayed by selecting
“Menu” in the launcher menu.
For details on the Memory Stick menu, see
pages 95 to 99 and page 108.
Setup menu
The Setup menu is used for participants in
the videoconference before or during the
conference.
The menu appears when you select
from
the menu tabs displayed by selecting
“Menu” in the launcher menu or by pressing
the MENU button on the Remote
Commander.
For details on the Setup menu, see pages 70
and 71.
Setup menu (for the administrator)
The Setup menu for the administrator is used
to set various detailed items on the system.
The menu can be displayed by keeping the
MENU button on the Remote Commander
pressed.
You can also display the Setup menu for the
administrator by pressing the numeric button
9 on the Remote Commander twice while
the Setup menu (Initial Setup) or the screen
in communication is displayed.
For details on the Setup menu (for the
administrator), see pages 38 to 60.
Memory Stick
Off Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority Video/Audio
Setup
Save Cancel
Note
Dial
Multipoint
General
ISDN
Information
Answer
Audio
Administrator
LAN
Status
Setup
Encryption via LAN