Sony STR-DA5ES - Manual (Page 43)

43
Enjoying Surround Sound
Front speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Front speaker midrange adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
midrange.
Front speaker midrange bandwidth
Lets you adjust the width of the midrange band.
• “WIDE” provides a wide band centered on the
selected frequency, for general adjustments.
• “MIDDLE” provides a normal band.
• “NARROW” provides a narrow band centered
on the selected frequency, for specific
adjustments.
Front speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
Center speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Center speaker midrange adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
midrange.
Center speaker midrange bandwidth
Lets you adjust the width of the midrange band.
• “WIDE” provides a wide band centered on the
selected frequency, for general adjustments.
• “MIDDLE” provides a normal band.
• “NARROW” provides a narrow band centered
on the selected frequency, for specific
adjustments.
Center speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
Surround speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Surround speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
Surround back speaker bass
adjustment (Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Surround back speaker treble
adjustment (Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
Clearing Stored Equalizer Settings
1
Press EQUALIZER repeatedly to select
the equalizer you want to clear (EQ
PRESET [1]–[5]).
2
Press EQ.
3
Press the cursor buttons ( or ) to
display “PRESET x CLEAR [NO]” (“x”
is the number of the current equalizer
preset).
4
Turn the jog dial to display “PRESET x
CLEAR [YES]” and press ENTER.
“Are you sure? [NO]” is displayed.
5
Once again, turn the jog dial to display
“[YES]” and press ENTER.
“PRESET x CLEARED !” is displayed and
the contents of the selected equalizer bank
are restored to the factory presets.