Sony STR-DA5ES - Manual (Page 65)

65
Operations using the remote
1
Press SET UP.
The set up list appears.
p RECEIVER
IR SET
LEARNING
DOWNLOAD
2
Move the easy scroll key to select “IR
SET”, then press the key to enter the
selection.
The IR SET list appears.
<IR SET>
[VIDEO 1 ]
p [VIDEO 2 ]
[VIDEO 3 ]
3
Move the easy scroll key to select the
component (“VIDEO 2”, for example),
then press the key to enter the
selection.
The category list appears.
Category?
p
VCR
T V
L D
4
Move the easy scroll key to select the
category (i.e., the component that is
actually connected to the
corresponding jacks; in this case,
“LD”), then press the key to enter the
selection.
The maker list appears.
Maker?
Sony
DENON
p Kenwood
5
Move the easy scroll key to select the
maker of the component (“Kenwood”,
for example), then press the key to
enter the selection.
When programming the remote to
control Sony component
Select “Sony.”
Programming is now completed.
To cancel programming
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
Tip
You can freely assign any component to USER 1 and
2 items in the IR SET list
1 Do steps 1 and 2 in “Programming the Remote”.
2 Move the easy scroll key to select “USER 1” or
“USER 2,” then press the key to enter the selection.
3 Continue from step 3 in “Programming the Remote”
to select the category and maker of the component.
Note
If you select “IR SET” for a component that already
has a learned button setting, the learned codes for that
component are cleared. Furthermore, if the cleared
learned button is used in a Macro Play setting, the
setting for that button will be changed to “NO SET”.
Performing several
commands in sequence
automatically (Macro Play)
The Macro Play function lets you link several
IR codes in a sequential order as a single
command. The remote provides 2 macro lists
(MACRO 1 and 2). You can specify up to 16
IR codes for each macro list.
Setting the sequence of IR codes
1
Press SET UP.
The set up list appears.
p RECEIVER
IR SET
LEARNING
DOWNLOAD
2
Move the easy scroll key to select “IR
SET”, then press the key to enter the
selection.
The IR SET list appears.
<IR SET>
p
MACRO1
MACRO2
Exit
continued