Sony STR-DA5ES - Manual (Page 66)

66
Using the lists (continued)
3
Move the easy scroll key to select
“MACRO1” (or “MACRO2”), then press
the key to enter the selection.
The program list appears.
<MACRO1>
p
1-NO SET
2-NO SET
3-NO SET
4
Move the easy scroll key to select the
macro step number (“1-NO SET” for
example) then press the key to enter
the selection.
The category list appears.
Category?
Common
Button
p VCR
5
Move the easy scroll key to select the
component category (“VCR” for
example), then press the key to enter
the selection.
The maker list appears.
Maker?
p
Sony VTR1
Sony VTR2
Sony VTR3
6
Move the easy scroll key to select the
maker, then press the key to enter the
selection.
The function list appears.
Function?
p
*POWER
*PLAY
*STOP
7
Move the easy scroll key to select the
IR code for the operation you want to
perform, then press the key to enter the
selection.
The program list reappears.
<MACRO1>
p
1-POWER
2-NO SET
3-NO SET
8
Repeat steps 4 through 7 to program
up to 16 IR codes.
When you have finished programming IR
codes, select “Exit” in step 7.
To use learned codes under the
Macro Play function
1 In step 4, move the easy scroll key to select
“Button”, then press the key to enter selection.
2 Move the easy scroll key to select the button of
the learned codes.
When selecting a button, you can press the
button directly, instead of scrolling down the
list, to jump to the desired button in the list and
transmit the IR code.
To delay the output of an IR code
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
2 Move the easy scroll key to select “WAIT
TIME”, then press the key to enter selection.
3 Move the easy scroll key to select the time to
delay the output of an IR code, then press the
key to enter selection. You can specify from 1
to 10 second delay (in 1 second increments).