Sanyo PJLINK PLC-XL51 - Manual (Page 15)

15
Mounting the Rear Leg and the Stand
Rear Leg
Stand*
Turn off the projector and unplug the AC power cord. 1
Secure the rear leg with the four (4) screws. 2
Turn off the projector and unplug the AC power cord. 1
Secure the stand with three (3) sets of the screw
with a washer.
2
Screw
Rear leg
Stand
Installation
* The stand is included in standard accessories.
✔ Note:
• Make sure not to lose screws when installing the rear leg
or the stand.
Screw with
a washer