Sanyo PJLINK PLC-XL51 - Manual (Page 53)

53 53
Setting
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point d button, and
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point ed buttons. And
then press the Point 8 button to fix the number and
move the pointer. Repeat it to complete entering a four-
digit number. After entering the four-digit number, move
the pointer to "Set" by pressing the Point 8 button. Then
press the SELECT button.
Change the PIN code
Change the PIN code
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
Change the PIN code lock setting
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 75, AND KEEP IT
SECURELy. IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED.
Select Off, On1, or On2 with the Point 7 8 buttons and
then move the red frame pointer to “Quit” with the Point
d button. Press the SELECT button to close the dialog
box.
Change the PIN code lock setting
Select a desired setting with the
Point
7 8 buttons.
The input numbers
are being displayed for
confirmation.
Alarm
This function allows you to configure the Alarm
operation. See “How to Use the Antitheft Alarm
Function” on pages 56-59.