Setting – Sanyo PJLINK PLC-XL51 User Manual
Page 48
48
Logo PIN code lock Dialog Box
Enter a Logo PIN code
Select a number by pressing the Point
ed
buttons.
And then press the Point
8
button to fix the number
and move the pointer. The number changes to "✳". If
you fixed an incorrect number, move the pointer to the
number you want to correct by pressing the Point
7
button, and then select the correct number by pressing
the Point
ed
buttons.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
8
button. Press the SELECT
button so that you can change the following Logo PIN
code lock settings.
If you entered an incorrect PIN code, "Logo PIN code"
and the number (✳✳✳✳) turns red. Enter a correct Logo
PIN code all over again.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Select “Logo PIN code change” with the Point
d
button and press the SELECT button. Set a new Logo
PIN code.
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to relevant instructions of the PIN code lock
function on pages 52-53.
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off…… the screen logo can be changed freely from the
Logo select menu (p.47).
On…… the screen logo cannot be changed without the
Logo PIN code.
If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set “4321” at the factory.
Logo PIN code lock
Setting
CAUTION:
WHEN yOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 75, AND
KEEP IT SECURELy. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED.
After a correct Logo PIN code is entered, the
following dialog box appears.
Select On/Off by pressing the Point
7 8
buttons or
change the Logo PIN code.